
D-subminiature Metal Shell and All Plastic
Solder Cup and IDC
T* Series
■ Offered in 9, 15, 25, and 37 position plugs and sockets.
■ Available in Solder Cup and IDC (insulation displacement) terminations for discrete wire.
■ Offered with .120 mounting holes.
■ Approvals:
?
?
UL Recognized - Files E170218 (UL1977) and E130965 (UL1863).
CSA Approved - File LR31996.
■ See pages 4-5 thru 4-10 for standard dimensions, contact arrangements, and panel
mounting specifications.
Insulator Material: Glass-filled polyester (black), UL 94 V-O rated
Connector Shell: Steel with zinc plating and yellow chromate finish or
tin plating (grounding indents on plug)
Contact Material: Phosphor bronze (stamped)
Contact Plating: Gold flash or 30μin. gold in mating area and gold
flash on the remainder. All over nickel.
Operating Temperature: -65°C to + 125°C
Shock: 50G peak per MIL-STD-202, Method 213, Condition G
Vibration: 12 cycles in three perpendicular directions @ 10-2000Hz, per
MIL-STD-202, Method 204, Condition D
Moisture Resistance: 90-95% relative humidity @ 40°C for 96 hours per
MIL-STD-202, Method 103
Withstanding Voltage:
Current Rating:
Contact Resistance:
Insulation Resistance:
Minimum 1000V RMS @ sea level
3 Amps
2.7 milliohms maximum
5000 megohms maximum (initial);
1000 megohms (minimum) after
environmental testing
Individual Contact Insertion and
Separation Force (minimum/maximum): 0.7 oz./12 oz.
Durability: 500 mating cycles
Call Toll Free: 1 (800) 323-9612
4-34